38 Comments

• 1. TaeJun Lee replies at 4th March 2008, 11:27 pm :

  Thanks for good info.

  However, I did “Do it all” by mistake, is this mean I void warrenty and can never reverse IPhone back to Factory Default evern if I restore to original 1.14?

• 2. admin replies at 5th March 2008, 2:04 am :

  TaeJun Lee,

  You can try whether you can reverse the unlock if you want,

  http://www.winandmac.com/mobile/iphone/how-to-downgrade-113-and-make-it-work-as-iphone-again/

  If you saw incorrect SIM after all, then your unlock is reversible.

  And as always, try it at your own risk!

• 3.   How to: Use iPhone&hellip replies at 6th March 2008, 10:11 pm :

  [...] (for mac only, windows user please click here) [...]

• 4. TaeJun Lee replies at 6th March 2008, 10:53 pm :

  Thanks for your reply.

  However, is this something ever tested or done? or you are giving me a possible way of restoring?

  Also what should I do once I perform restore and end up getting “Invalid SIM” message?

  Can’t I just do Recovery Mode - Firmware update of 1.14?

• 5. Mytch replies at 7th March 2008, 6:04 am :

  Hi fellows

  I followed the guide but got stuck on the UNLOCK using Putty…putty showed me the “based on the Geohot’s unlock code” and then stopped…..I tried again but then my WIFI blocked and so putty couldn’t pick up the signal. My phone gave me a message “Iphone can’t make nor receive calls, Iphone need to be repaired”. So I had only one chance left and that was trying to use Ziphone again and choose option “do it all”…..and….it worked……took only a minute and my phone is working….restored my wifi-function, unlocked my sim,…..

• 6. Tap replies at 7th March 2008, 4:48 pm :

  I’m new to this stuff therefore I need more help. In step 3 thru step. I do not understand. I need step by step instructions from that point on. Because after I Click Installer and click “BSD Subsystem” nothing happen. Please help.

• 7. admin replies at 8th March 2008, 1:54 pm :

  Tap,

  If you are new to this, I suggest you click “Do It All” and the steps will be completed automatically.

• 8. LILIANA replies at 9th March 2008, 11:52 am :

  I NEED HELP WHIT IPOD TOUCH VESION 1.1.1.4
  PLEASE HELP…….

• 9. Yogi replies at 11th March 2008, 10:34 am :

  i had updated and unlocked my iphone to 1.1.4 with ZiPhone. My iphone and itunes are telling me that my iphone is 1.1.3, and sometimes 1.1.4, is anyone else having this issue? it’s kind of strange, but my iphone still works!

• 10. Mo replies at 13th March 2008, 11:14 am :

  Hi Admin,
  is there anyway to use custom ringtones on 114? sendsong doesnt seem to work on that.

• 11. Yogi replies at 13th March 2008, 11:30 am :

  Mo,
  if it’s in itunes, all you have to do is convert the file to aac by right clicking, drag to the desktop, and rename extension to .m4r (ex song.m4r) instead of .m4a open the ringtone folder, and drag it back. Make sure the song is under 30 seconds, i use nero wave editor to cut tracks, but there are many programs that are free on the net. If you already have a ringtone category in itunes you should be ok, if not there is a tutoriol for everything including what i had just explained here
  http://www.iclarified.com/entry/index.php?enid=439

• 12. D-Line replies at 15th March 2008, 6:58 am :

  Hi Admin

  I Updated fully to 1.1.4, and Iphone works perfect, but i’ve got 1 big problem:

  It wont connect to itunes anymore, so i cant sync contacts and i cant restore it.

  thx for help. bye

• 13. D-Line replies at 15th March 2008, 6:59 am :

  what do i have to do? any idea? peace

• 14. admin replies at 23rd March 2008, 4:45 pm :

  Devon Dhaliwal,

  Hello. Looks like you are living in US and using AT&T?

• 15. admin replies at 23rd March 2008, 4:46 pm :

  D-Line,

  I suggest you to put the iPhone in DFU mode to see whether iTunes can still detect it

• 16. Devon replies at 24th March 2008, 4:32 pm :

  hi this is devon and im in canada using rogers, everything works fine except for setting a song as my ringtone, ive tried sendsong and it does not work

• 17. wto replies at 24th March 2008, 6:14 pm :

  I have an unlocked OTB1.1.1. (I unlocked it by following a guide in this website a few months ago) Shall I just follow this guide to upgrade it to 1.1.4? Or, should I virgin my iPhone before following this guide. Thanks a lot.

  2nd question. I will have a new OTB1.1.4 tomorrow for my wife. Shall I follow this guide or which guide should I follow to unlock it? Thanks a lot.

• 18. admin replies at 24th March 2008, 6:24 pm :

  wto,

  Yes. You can follow this guide. just backup stuff first. and make sure you understand hacking is dangerous and may brick your iPhone. There’s no one to be blamed if it happens.

  And for OTB 1.1.4, reports are saying this guide will work. But you need to do one additional steps. That is download ZiPhone, then, choose downgrade bootloader to 3.9 under “advanced features”.

• 19. wto replies at 24th March 2008, 6:29 pm :

  Thank you very much.

  I remember that I was told not to update my unlocked iPhone thru iTune. It will brick my unlocked iPhone. But for Step 1 of this guide, I need to do so. Just quite worry. Could you help to tell in more details on how to “restore and update the iPhone to 1.1.4″? Thanks again for your help.

• 20. admin replies at 24th March 2008, 9:50 pm :

  wto,

  Before you restart the iPhone through iTunes, you must downgrade your bootloader through ZiPhone first. Then, you are safe to restore the iPhone. If you are really scared and worry about bricking iPhone, just don’t do it.

  Every hacking is dangerous. Do it or not is up to you. No one should be blamed if everything goes wrong.

• 21. wto replies at 25th March 2008, 9:42 am :

  Thanks again. Understand that I should take my own risk.

  Can you share with me how to “Restore” / “Restart” my iPhone? My iPhone is OTB1.1.1. Should be old bootloader. But already unlocked. Still do not quite catch how to complete Step 1.

  Sorry for so many question. For totally new OTB1.1.4 (no action taken), can start from Step 2? Am I correct?

  Thanks a million.

• 22. Hunter replies at 26th March 2008, 1:45 am :

  I’m having the same problems as D-Line.

  I updated the firmware to 1.1.4 and the phone itself works perfectly. I am able to call people, receive calls, text message, etc etc.

  The only problem is that I am unable to connect my iPhone to iTunes. It recognizes the phone in the diagnostics and when I put my phone into DFU mode (I’m just wary about restoring the phone using iTunes because I don’t want to brick the thing).

  Just wondering if D-Link found a solution or if there is one somewhere I can follow.

  Thanks.

• 23. Mo replies at 3rd April 2008, 1:16 am :

  Yogi,
  Thanx man. I tried it but it didnt work on my iphone. i’m currently running on 114(4A102). Do u have any other suggestions?

• 24. GESELAW replies at 23rd April 2008, 5:07 pm :

  Is there a way to run an application (BootNeuter on IPHONE) from ssh. I can not run the app from the iphone because the top half of my iphone screen digitizer is not working and I need to restore my iphone to original state to send it for repair.

  Thanks

• 25. Sven replies at 1st May 2008, 6:42 am :

  When I connect it to my computer, Itunes says my phone is damaged and can not be activated, I’m running windows vista and itunes version 7 (7.6.2.9)

• 26. admin replies at 1st May 2008, 6:30 pm :

  Sven,

  Try to put your iPhone in recovery mode by press and hold home and power button at the same time. Hold it until it shows you a dialog. click “check” button and try to restore it.

• 27. mandar replies at 9th May 2008, 11:42 pm :

  Hi I am using an unlocked iPhone 1.1.4 version. Everythings working fine except that quite recently one of my friends hid the installer icons and a lot of other icons using poof. I can’t see any icons on my phone due to which I can’t install or uninstall anything. I am in India and using vodafone. I still have access to wifi and GPRS. Guys out there please help. Have tried resetting it to factory setting still no use.

• 28. admin replies at 10th May 2008, 1:38 am :

  mandar,

  Are you sure after you restore the iPhone, you run ZiPhone to jailbreak and activate it?

• 29. Mo replies at 14th May 2008, 7:41 pm :

  Hi all,
  Does anyone know if there is a way to put installer on itouch? i just bought one and seriously dissappointed

• 30. Mo replies at 14th May 2008, 7:42 pm :

  BTW i also got a 16gb iphone and used Ziphone on it. it works fine. no problems what so ever.

• 31. Mo replies at 14th May 2008, 7:45 pm :

  Admin,
  I there a way to use my own songs as ringtones on a 16gb jailbroken 114?

• 32. admin replies at 15th May 2008, 1:24 am :

  Mo,

  Do you know how to SSH? If you know, that is easy. Convert the file you want to m4a (using iTunes. right click and choose “convert to AAC”). Then, rename it to .m4r. (with space before .m4r) . Finally. upload it to iPhone’s /Library/Ringtones.

• 33. Mo replies at 15th May 2008, 9:54 am :

  Admin,
  thank you for ur response. i have tried it and on the ssh screen it shows the file has been uploaded but it does not appear in the phone.

  i also noticed that when i went to upload the file name came out as .m4r.m4a is that how its supposed to be?

• 34. Mo replies at 15th May 2008, 10:11 pm :

  Admin,
  i managed to sort it out. it was the name in ringtones file. it works now. thank u.

  can the same be applied to sms tones? if so where would i find the sms tone file?

  also how do i install installer on my itouch 114?

  many thanx

• 35. hello1223 replies at 29th May 2008, 1:04 pm :

  I got to the point where i typed in “./114unlock secpack ICE04.04.05_G.fls” and it gave me an “zsh: permission denied: ./114unlock”. I’m stuck please help

• 36. admin replies at 29th May 2008, 11:19 pm :

  hello1223,

  Type “chmod +x 114unlock”

• 37. Timothy replies at 5th June 2008, 11:54 pm :

  were do I download Ziphone 2.5 for windows

• 38. admin replies at 6th June 2008, 2:53 am :

  Timothy,

  ZiPhone is available in http://www.ziphone.org/

Leave a comment