47 Comments

• 1. Chris replies at 21st January 2008, 3:43 am :

  im stuck on step 7 i dont know what to do.. plz help

• 2. 1.1.3 hater replies at 21st January 2008, 1:37 pm :

  Do you have a similar solution for Windows?

• 3. 5337 replies at 21st January 2008, 5:57 pm :

  I just get the error 1 in itunes when I try to use any firmware other than 1.1.3. I have the 3.6 boot. Any ideas on how to force itunes to load 1.0 ?

• 4. 5337 replies at 21st January 2008, 7:04 pm :

  I got past the error 1, you may want to add that in step 8 you have to SSH to the iphone to run those commands.

• 5. admin replies at 22nd January 2008, 1:03 am :

  1.1.3 hater,

  Yes. And the guide will be here within few days.

• 6. asdf replies at 22nd January 2008, 8:37 am :

  how do you get past the error 1?

• 7. MicroKhan replies at 22nd January 2008, 9:09 am :

  very nice, Thank you very much… i downgraded the 1.1.3 to 1.1.2 and it’s working.

• 8. WinAndMacNoob replies at 23rd January 2008, 12:59 am :

  Thanks for the walkthrough, it worked flawlessly and its working again with version 1.1.2. Nonetheless, I noticed that now the iPhone’s capacity is only 300MB instead of 8GB. Any info on this???

• 9. Stii replies at 23rd January 2008, 5:56 am :

  Okay, LoL, Me again.. I Restarted my iPhone now, and this is what I get in Terminal now:

  -sh-3.2# launchctl remove com.apple.CommCenter
  -sh-3.2# cd /usr/bin
  -sh-3.2# ieraser
  -sh: ieraser: command not found
  -sh-3.2#

  What do I do now?

• 10. ge replies at 23rd January 2008, 1:01 pm :

  Thank you

• 11. prabhu replies at 23rd January 2008, 5:54 pm :

  when installer icon is tapped,it goes to refreshes and and asks for the update and when tapped on the install option it goes to install and finally shows (error missmatched file)so i am not able to go for third party taps.please guide me
  for this error.

• 12. admin replies at 23rd January 2008, 9:14 pm :

  prabhu,

  There is an update of Installer yesterday. May be you can try it later.

• 13. admin replies at 23rd January 2008, 9:17 pm :

  Stii,

  Did you download the pack and upload it to iPhone?

• 14. admin replies at 23rd January 2008, 9:19 pm :

  asdf,

  Are you using iTunes 7.6?

• 15. Jay replies at 23rd January 2008, 10:25 pm :

  how can i get past error 1 i have 1.1.3 and i downgraded to 1.0.2 after extracting it comes error 1 iphone couldnot be resotred need help plzzzzzzzzzzzzzzzz so how do i downgrade to 1.0.2 and i can’t downgrade to anythin else eithermit keeps cuming error 1

• 16. admin replies at 24th January 2008, 12:11 am :

  Jay,

  If you are using iTunes 7.6, it is NOT easy to put it in DFU mode. So, for me, I use iTunes 7.5 in Windows to help me. If you would like to, you can downgrade your iTunes using oldapps.com guide

• 17. Stii replies at 24th January 2008, 3:44 am :

  Okay folks.. I wasn’t patient enough to wait for answers, so i went to this site i wrote under there and tried to do step 7 there, and it worked.. A bit more complicated though.. (It’s for Windows, so you have to think a bit..)

  My History:

  OTB 1.1.1, very happy when i made it work 100%.
  Wanted to upgrade to the 1.1.2. Read a guide about how to do that, so I did exactly what it said, and then I was supposed to press upgrade in iTunes, so i did, but i didn’t know or notice that 1.1.3 had come out the day before, so that was how my iPhone 1.1.1 3,9BL OTB became 1.1.3 iNothing..

  NB! I think it is smart to read the whole post before you try to do something, so you won’t miss anything. I will write all the problems i had with this downgrading, and my solutions, and I hope it will help you guys;)

  http://george.zjlotto.com/index.php/2008/01/18/secpack-040313_g/

  I’ve got normal baseband and shit now.. Try to combine this beautiful site and the one i wrote above. It worked for me.

  Some tips:
  When I downgraded from 1.1.3 to 1.0.2, I got the same message somebody told us about here..
  When it was done, it said first Error 1013, as expected, but when i pressed OK, a new message popped up, telling me that the iPhone that was found, still were in restore mode or what the hell it is on English(My iTunes is on Norwegian).
  I didn’t understand shit, so i tried it again and again.. Still on restore mode or recovery mode or wtf.. DFU shit..

  This is what i did to make it work: When i started the downgrading to 1.0.2, iNdependence was turned off.
  The downgrading completed, and then it said Error 1013, and i did NOT press okay. I looked at my iPhone, and saw this ugly yellow 1.0.2 sign like before. If you press “OK” on Error 1013 now, then iTunes will detect your iPhone as DFU, but if you open iNdependence when you have the 1013 on screen, then iNdependence will try to connect to the iPhone. At first nothing happened to me, so i panicked and started to push the Power-button and Home button some times totally random, and then i pressed “OK” on 1013, and then pushed Home and Power some more just for fun, and suddenly the Activation Screen showed up on the iPhone.. I doubt the pushing on the buttons helped anything, but that was what I did. And I did it twice.. Cause the first time i fucked up with baseband etc.

  I also had some problems with iNdependence when i was going to activate, cause it said something about “problem with entering recovery mode”.. Just quit and restart iNdependence and it will work. If that not work, try to restart the Mac.

  I was finally done with a complete 1.0.2, and found out that i should upgrade to 1.1.1, so i did that.. Not the way it says here, bt just as easy as downloading the 1.1.1.ipsw, and upgrade to that.. Just forgot to do it the way it said here, so i don’t know if that works(i bet i does), but my method works. Just doing the 1.1.1 unlock. Very easy.

  Now I can make and get calls, send sms, use Installer.app etc.

  So.. If there is anything you want to ask me, mail me at Stiian@mac.com. I will probably not enter this site again ever, but I will help you if you contact me.
  Thanks to Admin who has helped us so much with this.. You saved my life!(iPhone)

  I don’t know if this post is to any help to anyone, but again.. I am a newbie to Mac and all that, and I’m pretty sure I’m not the only one..

  Stii

• 18. Jay replies at 24th January 2008, 3:19 pm :

  I tried on windows 7.5 and i even downgraded to 7.4.2 on mac and windows i still get error 1

• 19. Mike M. replies at 25th January 2008, 12:19 pm :

  Hey admin,
  I got an error this:

  ProcessDetailUpdated: Boot-loader is active
  ProcessDetailUpdated: EBL version: 4.6_M3S2 4..6
  ProcessDetailUpdated: Boot mode is: CC
  ProcessDetailUpdated: Baud rate set to 750000
  ProcessDetailUpdated: Get flash id.
  ProcessDetailUpdated: CFI stage 1
  ProcessDetailUpdated: Flash ID is: 88620089
  ProcessDetailUpdated: CFI stage 2
  ProcessDetailUpdated: Boot process finished
  ProcessOutlineUpdated: Reading SW version data
  ProcessDetailUpdated: Receiving data.
  ProcessOutlineUpdated: Process time was 10.0 sec.
  Upgrade from ??/ to
  Downloading EEP
  ProcessOutlineUpdated: Start downloading from file ICE03.14.08_G.eep.
  ProcessDetailUpdated: Sending sec-pack.
  ProcessDetailUpdated: Load region 0
  ProcessDetailUpdated: Sending end-pack.
  ProcessOutlineUpdated: Process time was 923 msec.
  Error: Failed to download .EEP: Could not verify downloaded image.
  Done
  What am I doing wrong and what can I do to by pass this???

• 20. Jay replies at 25th January 2008, 8:03 pm :

  srry bout that but i can downgrade to 1.0.2 but after doing the pre firmware thing i can’t upgrade to 1.1.1 but i can upgrade to 1.1.2 but i need to oktoprep for 1.1.2. so how do i get rid of error 1 if i want to upgrade to 1.1.1. i tried everything everytime i try to upgrade to 1.1.1 from 1.0.2 it comes error 1 so need help plz

• 21. rob replies at 28th January 2008, 1:12 am :

  I have a question how do you check what bootloader you have I had gotten my iPhone on september 25, 2007 I think its the right bootloader but I wanna checkmy other question is did anyone successfully downgrade and can make phone calls also I want to know if you can upgrade it again cause I might wanna install 1.1.3 when sdk comes out

• 22. saihax replies at 28th January 2008, 2:43 am :

  do u have a guide for this in Windows to?

• 23. admin replies at 29th January 2008, 1:41 am :

  rob,

  Open your iPhone, If you see the iTunes logo and the cable, it is probably a 1.1.2 otb.

• 24. NeO replies at 29th January 2008, 2:18 am :

  For error (1) - the solution is to make it in DFU mode using iBrick. and after that with iBrick opened, use iTunes to SHIFT +Restore what you want.
  For me was 2 days of trying till I found out that. After that you get 1015 error

• 25. admin replies at 29th January 2008, 2:34 am :

  NeO,

  Good tip and thanks!

• 26. leo replies at 30th January 2008, 4:28 am :

  Hi,
  i did everything you told me and im at Step 8. Unfortunatly i have 04.02.13_G and not 04.03.13_G… what should i do now?

• 27. Eugene replies at 1st February 2008, 11:44 am :

  To put it into DFU mode on a Mac keep your phone and and plugged in. While its on and plugged in press and hold the power and home buttons for about 10 seconds as the screen turns black. When it turns black let go of the power button and keep holding the home button until iTunes tells you your iPhone is in recovery mode. There wont be anything on your screen because it will be in DFU mode. Enjoy!

• 28. Rob Alex replies at 3rd February 2008, 4:19 pm :

  Admin, hi… i know you are away right now but maybe when you return you can answer me and “1.1.3 hater” is there is a way to do all this in windows. is there an iNdependence for windows? remember problem is that our iphone is BASEBAND 04.03.13_G no matter in what firmware we are.
  Hoper everything went well on the business trip. take care dude…

  Rob

• 29. admin replies at 5th February 2008, 9:28 am :

  Rob Alex,

  there is no iNdependence tool in Windows. But you can take a look:
  http://www.winandmac.com/mobile/iphone/win-dev-team-method-from-any-version-to-iphone-113-unlocked-and-jailbroken/

  It helps you to upgrade the iPhone to 1.1.3

• 30. fabiano replies at 6th February 2008, 8:49 am :

  sorry for the dumb question, but i already put 1.0.2 to my iphone and jailbreaked it, but i cant find the way to open a Terminal, i cant use the installer.app because it is for 1.1.1 so im stucked, please help

• 31. admin replies at 6th February 2008, 10:04 am :

  fabiano,

  You can find the terminal by using the spotlight of Mac OS

• 32. Joey replies at 6th February 2008, 12:49 pm :

  Incredible… I had messed up my iphone by downloading some crap onto to it… I followed the steps, and I was able to downgrade my iphone back to 1.1.1.

  What’s really interesting about this whole thing is that after I did the jailbreak (2nd time using the *#307# method). I didn’t have to install AnySIM or anything like that… It turns out that the phone was able to utilize any sim which I find interesting.

  Anyway… GREAT WORK GUYS… Keep it up!

• 33. nacho replies at 7th February 2008, 12:23 am :

  Could you please explain a bit deeper the step #7. How can I extract and upload the .zip file to that location on the iPhone? Is this through the Mac or directly downloaded to the iPhone using the wi-fi?
  I’d appreciate any help. Thks

• 34. fabiano replies at 7th February 2008, 2:40 am :

  tnks for the info. I managed to get all the steps in place but when i want to overwrite te .eep and the .fls files i get this error at the bottom:

  Error: Failed to download .EEP: Could not verify downloaded image.

  this means that i cant downgrade the device? or i am doing something wrong?

  what do you recomend me to do to fix this?

  Thanks

• 35. Eugene replies at 7th February 2008, 12:06 pm :

  Yup, I tried this too. It told me its unlocked when anysim was finished in 1.1.1 and then it tells me that my sim is unapproved and cannot be used.

• 36. Hisam replies at 7th February 2008, 1:39 pm :

  i am stuck on step four i am having trouble activate my phone in 1.0.2 so if anyone can help please e-mail me

• 37. admin replies at 8th February 2008, 1:32 am :

  Hisam ,

  What do you mean by stuck? Stuck in recovery mode? If yes, use iNdependence to wake it up

• 38. admin replies at 8th February 2008, 1:34 am :

  nacho,
  Right click and choose extract in Mac. Easy

• 39. Gavin replies at 8th February 2008, 5:56 pm :

  Does anyone know how to fix the 300MB problem?

• 40. G-money replies at 9th February 2008, 1:22 am :

  hi follks..

  I´m in terminal now, but when I´ve typed the password into terminal, i only can write 3 letters and then terminal logg me out from the iphone… why?

• 41. Nick replies at 9th February 2008, 1:23 am :

  I accidentally upgraded to 1.1.3 w/ iTunes. Now I can’t get my iphone to DFU mode. In fact, iTunes 7.4 doesn’t recognize it anymore and prompt a message to connect to iTunes 7.5 or higher. Is there any alternatives to command the iPhone into DFU mode without pressing together power and home button? Because mine doesn’t seem to work anymore.

• 42. janlastwk113 replies at 10th February 2008, 12:04 am :

  does anyone know if 1.1.3 (bl 4.6) can be downgraded to 1.1.1 and be used with a valid at&t sim (sim of course is not with iphone plan). will i still lose the phone functionality?
  if it is possible pls give me some websites
  thx

• 43. Dave replies at 10th February 2008, 4:11 am :

  Genius!! Got up to 1.1.3 firmware a few days back but that was still using the 1.1.2 baseband. I foolishly tried updating the baseband to 1.1.3 this morning and AnySIM 1.3 crapped out my iPhone.

  Thanks to this guide I have gone back down to 1.0.2 then up to 1.1.3 with 1.1.2 baseband, I will be waiting for a better AnySIM update to come out before upgrading the baseband anytime soon. But thanks this was a lifesaver. I thought my iPhone was well and truly a screwed for a good hour before I found this.

• 44. admin replies at 10th February 2008, 3:38 pm :

  janlastwk113,

  Yes. Take a look of this news:

  http://www.winandmac.com/news/iphone-bootloader-46-is-finally-software-unlocked/

• 45. Emil replies at 11th February 2008, 9:22 pm :

  HI,

  When I try Step 1 stage 2 it says error 1… What shall I do?

• 46. admin replies at 11th February 2008, 10:00 pm :

  Emil,

  Put it in DFU mode.

• 47. Emil replies at 12th February 2008, 12:34 am :

  Hi again,

  It will not start to downgrad in Itunes. Now the Iphone has restored 1.1.3 so I can not open it.. What should I do? Thanks

Leave a comment